Command Start CS-580i FM Guide d'installation Page 3

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 22
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 2
Installation Guide P. 3
Introduction
This Guide contains all the information relevant and necessary for the installation of the
Alarm and Remote Starter System. Most of the features of this product are explained in the
User Guide. Therefore, if you need detailed information about a feature of the product, we
recommend that you refer to the User Guide.
Included in the Kit
Please carefully read the Installation Guide before beginning the installation, especially the
Harness Description section and the Programming Options.
It is very important that you familiarize yourself with the programming and the operation
of the System, even if you have already installed a similar System in the past. There are
many innovative features that you may overlook if you do not read this Guide.
Prior to the installation, make sure that all the hardware components required to install the
system are in the box.
The following is a list of components included in the kit:
1 – Remote Starter and Alarm System Control Unit
1 – Antenna Interconnect Cable1
1 – Long-range Transceiver
1 – plug-in dual-zone Shock Sensor
1 – plug-in L.E.D.
1 – high-power 120-dB 6-tone Siren
1 – six-pin 14 AWG Harness (Ignition Harness)
1 – five-pin 18 AWG Harness (Main Harness)
1 – twelve-pin 22 AWG Harness (Accessories Harness)
1 – two-pin 22 AWG Harness (Accessories Harness)
1 – parts bag: a Hood Pin-switch, a Connector and a Warning Label
1 – User Guide
1 – plug-in Valet Button
INDUSTRY CANADA USER NOTICE:
Operation is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including interference that
may cause undesired operation of the device.
To reduce potential radio interference to other users, the antenna type and its gain
should be so chosen that the equivalent isotropically radiated power (EIRP) is not more
than that required for successful communication.
FCC USER NOTICE:
The manufacturer is not responsible for any radio or TV interference caused by
unauthorised modifications to this equipment. Such modifications could void the user’s
authority to operate the equipment.
Vue de la page 2
1 2 3 4 5 6 7 8 ... 21 22

Commentaires sur ces manuels

Pas de commentaire